Kwikset Smart Keys are a popular brand of smart locks that provide added security to your home. However, if you ever lose or forget the combination to your Kwikset Smart Key, you may find yourself wondering how to bypass it. Luckily, there are a few ways to do this without having to replace the entire lock.
The first option is to try and reset the lock using the reset tool that comes with the lock. This tool is inserted into the bottom of the lock and will reset the combination when turned clockwise. It may take several attempts to reset the lock, so be patient and try again if it doesn’t work right away. Once the lock has been successfully reset, you will be able to set a new combination.
If you don’t have access to the reset tool or it doesn’t work, another option is to contact Kwikset directly and ask for a replacement key. They may be able to provide a new key that will fit your existing lock, allowing you to bypass it without having to replace the entire thing.
Finally, if all else fails, you can always hire a professional locksmith to come and bypass your Kwikset Smart Key. This method is likely to be the most expensive option, but it may be worth it if you need access in a hurry. A professional locksmith will have the tools and expertise necessary to bypass your lock quickly and safely, allowing you to gain access without having to replace the entire thing.
No matter which option you choose, it’s important to remember that bypassing your Kwikset Smart Key should only be done as a last resort. If possible, try resetting the combination first before seeking help from a professional or replacing the entire lock.
How do you reset the code on a Kwikset Smartcode 917
If you are looking to reset the code on your Kwikset Smartcode 917, there are a few simple steps that you can take to get it done quickly and easily. Firstly, you will need to locate the programming button located on the inside of the door handle or knob. This button can be easily identified by its red and yellow stripes. Once you have located the programming button, press and hold it for 15 seconds until the lock’s LED lights flash green twice. This indicates that you have successfully entered the programming mode.
Once in the programming mode, you will need to enter your new code by pressing the number buttons as indicated in the instructions that came with your lock. Once your code has been successfully entered, press and hold the programming button again for another 15 seconds until the LED lights flash green twice. This indicates that your new code has been successfully programmed into the lock.
If you ever want to change your code again, all you need to do is repeat these same steps and enter in a new code when prompted. It is important to remember that if you ever forget your code, you can always reset it by pressing and holding down the programming button for 15 seconds until the LED lights flash green twice. This will reset the lock to its original factory settings.
It is also important to keep in mind that this resetting process will only work with Kwikset Smartcode 917 locks, so if you have any other model of Kwikset smart lock, this process won’t work for you. Additionally, make sure to keep your new code written down somewhere safe so that you don’t forget it!
How do I change the code on my Kwikset Smartcode 914
Changing the code on your Kwikset Smartcode 914 is a simple process that only takes a few minutes. Before you begin, make sure you have the correct code and that the door is unlocked.
1. Start by pressing and holding the “Program” button located at the top of your lock. You will see a red light blink twice when it is properly activated.
2. Enter your current code on the keypad, followed by the pound (#) sign.
3. Press and hold the “Program” button once again for three seconds until you hear a beep.
4. Enter your new code twice, followed by the pound (#) sign each time. Make sure to remember your new code as you will need it to unlock the door in the future.
5. When you hear two beeps, you will know that your new code has been successfully programmed into the lock. The red light will also blink twice to confirm the change.
Now that you know how to change the code on your Kwikset Smartcode 914, it’s important to keep it secure by changing it regularly or whenever you believe it may have been compromised in any way. Remember to always store your new code in a safe place so that you can access it when needed.
How do I delete all codes on Kwikset Smartcode 914
If you’re looking to delete all the codes on your Kwikset Smartcode 914, it’s a relatively simple process. Here are the steps you need to follow:
1. Start by turning off the power to your Kwikset lock at the circuit breaker.
2. Next, take out the battery cover and remove the batteries from the lock.
3. With the battery cover still removed, press and hold down the Program button for 10 seconds. This will reset the lock to its factory settings and delete all codes stored in its memory.
4. Once the Program button has been released, replace the batteries and close the battery cover.
5. Finally, turn on power to your Kwikset lock at the circuit breaker again and you’ll be ready to start programming in new codes.
That’s all there is to it! Deleting all codes from your Kwikset Smartcode 914 is a simple process that only takes a few minutes to complete, so don’t hesitate to give it a try if you need to start from scratch with your lock’s code management system.
How do I reset my Kwikset Smartcode 913
If you’ve forgotten the programming code for your Kwikset Smartcode 913 electronic deadbolt, it’s easy to reset it. Follow these simple steps and you’ll be able to reprogram your lock in no time!
First, locate the programming button on your Kwikset Smartcode 913. This will be located on the interior side of the lock, just above the keypad.
Next, press and hold the programming button until you hear a single beep. This indicates that the lock has been reset and is ready for programming.
Now you’ll need to enter your new programming code. To do this, press the “9-0-0” keys on the keypad in sequence. Once entered, you’ll hear two beeps indicating that your new code has been accepted by the lock.
Finally, press the exterior “Schlage” button to exit programming mode and activate your new code.
That’s all there is to it! Now your Kwikset Smartcode 913 is ready to use with your new programming code. Remember to write down your code and store it in a safe place so that you don’t forget it again in the future.
How do I change the code on my Kwikset SmartCode 909
Changing the code on your Kwikset SmartCode 909 is a relatively simple process that can be completed in a few steps.
The first step is to locate the programming button on your Kwikset SmartCode 909. This button is typically located near the bottom of the door handle and is either a small red or black oval with a white interior.
Now, press and hold the program button until you hear two beeps from your lock. This indicates that you are in programming mode. Using a paperclip or other tool, press the pinhole near the top of the door handle twice to enter the new code. When you have finished entering the four-digit code, you should hear three beeps from your lock, indicating that the code has been successfully changed.
If you need to change the code again, simply repeat these steps. If you’re having difficulty entering a new code, make sure that you are pressing the pinhole firmly and accurately each time. Additionally, make sure that the programming button is still depressed while entering your new code.
Once you have successfully changed your Kwikset SmartCode 909’s code, it’s important to test it out to ensure that it works properly. To do this, press and hold down the program button until you hear two beeps from your lock, then enter your new code by pressing the pinhole near the top of the door handle twice. If successful, you should hear three beeps from your lock, indicating that your new code has been accepted.
With just a few simple steps, you can easily change the code on your Kwikset SmartCode 909 for added security and convenience.
How do I delete all codes on Kwikset SmartCode 909
If you’re looking to delete all codes on your Kwikset SmartCode 909, there are a few steps you’ll need to take to ensure all codes are successfully removed from the device.
The first step is to enter your mastercode and press the lock button within three seconds. Once you’ve done that, the LED will light up in green and you can begin the process of deleting all codes.
To delete all user codes, press and release the Program button five times. The LED will now flash red three times, which indicates that all user codes have been deleted.
If you also want to delete the mastercode, press and hold the Program button for five seconds until the LED flashes red three times. This indicates that the mastercode has been successfully deleted.
If you want to add a new code, press and release the Program button twice, enter your new code and press the lock button within three seconds. The LED will light up in green and your new code has been added.
It’s important to remember that if you enter an incorrect code more than four times in a row, the device will enter lockout mode for 40 seconds. During this time, it won’t accept any entry from any code. To reset the device after it enters lockout mode, simply remove and replace the batteries.
By following these steps, you can easily delete all codes on your Kwikset SmartCode 909. It’s important to remember that if you delete your mastercode, you won’t be able to reset any other codes or access the device until you add a new mastercode.
How do I factory reset my Kwikset Smart Code 955
If you’re looking to factory reset your Kwikset Smart Code 955, then you’ve come to the right place. This guide will walk you through the simple steps to successfully reset your lock and get it back to its factory settings.
Before beginning, make sure to have a paper clip or other small object ready that can be used to press the tiny reset button on the interior side of the lock.
Step 1: Begin by removing the battery cover from the interior side of the lock.
Step 2: Once the battery cover has been removed, you’ll see a tiny reset button. Using a paperclip or other small object, press and hold the reset button for 10 seconds.
Step 3: After 10 seconds have passed, release the reset button and the LED indicator light should flash green three times. This indicates that your lock has been successfully reset and is now back to its factory settings.
Step 4: Reinstall the battery cover and close the door. Your Kwikset Smart Code 955 is now ready to be programmed with a new user code.
That’s it! You’ve successfully factory reset your Kwikset Smart Code 955. If you have any questions or need assistance with programming your lock, please refer to your owner’s manual or contact Kwikset customer service for assistance.