Eddie Van Halen is widely known for his groundbreaking guitar work and his iconic tone. However, what many guitarists may not know is that Eddie Van Halen had a special relationship with the Soldano guitar amp company. In the early days of Van Halen, when the band was still playing local clubs in California, Eddie used Soldano amps to get his signature sound.
This relationship began when Michael Soldano, the founder of Soldano amps, asked Eddie to test out one of his amplifiers. Eddie was impressed with the amp’s performance and began using it in Van Halen’s shows. From there, the partnership between Eddie and Soldano blossomed. Michael Soldano designed a custom amplifier specifically for Eddie, called the SLO-100. This amp became one of Eddie’s go-to amplifiers during live performances and studio sessions.
In addition to the SLO-100, Eddie also used a number of other Soldano amps throughout his career. These included the SLO-30, the Super Lead Overdrive (SLO), and the Super Lead Overdrive II (SLOII). Each of these amps was designed to help Eddie achieve his unique sound.
Eddie Van Halen’s association with Soldano amps helped bring them to prominence in the music industry. The company continues to produce some of the best amplifiers on the market today. Many guitarists continue to use Soldano amps to help them achieve their own unique sounds. For this reason, it’s safe to say that without Eddie Van Halen, there would be no Soldano amps today!
What amps did Ted Nugent use
Ted Nugent is an American rock and roll icon known for his high-powered guitar riffs and hard-driving sound. He’s been rocking stages and releasing albums since the 1960s, and throughout his career, he has gone through a variety of amplifiers.
During the early years of his career, Ted Nugent used a ‘60s era Fender Bassman amplifier. This amp was known for its warm, round tones and its ability to produce clear highs. He also played a Marshall Super Lead amplifier with a JBL speaker cabinet. This setup was popular among rock guitarists in the late ’60s and early ’70s due to its crunchy distortion, tight bass response, and smooth midrange. Nugent also played an Ampeg V4B during this period. This amp is known for its big sound and ability to produce fat tones with plenty of bottom end.
In the mid to late ’70s, Ted Nugent switched to a Marshall Super Bass amp with a 4×12 cabinet. This combination provided him with a tight, aggressive sound that could cut through any mix. He also used Mesa Boogie Mark series amps during this time. These amps were popular among hard rock guitarists due to their ability to produce a wide range of tones from clean to heavy distortion.
By the 1980s, Ted Nugent had switched to Peavey amplifiers. He used Peavey Classic 50/50 and Peavey 5150 amplifiers during this time. These amps are known for their versatile tone and ability to produce anything from clean blues tones to searing metal leads. He also incorporated some effects into his sound such as an MXR Distortion+ pedal and a Boss CS-2 Compressor/Sustainer for added sustain and punch.
Throughout his career, Ted Nugent has used a variety of amplifiers to get his signature sound. From Fender Bassman amps in the ’60s to Peavey Classic 50/50s in the ’80s, he has consistently used different amps throughout his career in order to achieve various tones and sounds that have helped define his style of rock and roll music.
What amp does Eric Clapton use
Eric Clapton has used a variety of amplifiers throughout his career. His signature sound is widely associated with the Vox AC30, a 30-watt combo amp with three 12″ speakers. Clapton began using the AC30 in 1965 with Cream, and it’s been his go-to amp ever since.
The AC30 has a distinctive, punchy sound that’s perfect for blues and rock. It has plenty of headroom to accommodate Clapton’s loud playing style, and its bright and clean tones make it especially well-suited for single-note soloing. The three 12″ speakers also provide plenty of low-end thump for heavy blues rhythms.
In addition to the AC30, Clapton has also used several other amps over the years. He’s played through Fender Twins, Marshall stacks, and various other combos and heads. He’s also experimented with a range of effects pedals and outboard gear to create different tones.
No matter what amp he’s using, Clapton’s signature sound is unmistakable. He has a unique ability to bring out the best in any amp, giving it an unmistakable warmth and character that can’t be replicated by any other player.
What amps did Def Leppard use
Def Leppard is one of the most iconic rock bands of all time and their signature sound has been a major influence on the genre for decades. As such, it stands to reason that the amps they used to power their sound are just as important as the guitars, drums, and vocal performances.
From their early days playing in pubs to their massive stadium tours, Def Leppard has relied on a mix of amps to create their unique sound. In the early days, they relied heavily on Marshall amplifiers, which are renowned for their powerful, crunchy sound – something that was essential for a hard rock band like Def Leppard. However, as they moved into bigger venues and experimented with different sounds, they began to branch out and use other amps too.
In the studio, Def Leppard typically used an array of different amps to achieve their desired tone. During the recording of their classic album Hysteria, for example, they used a combination of Marshall JCM 800s and JCM 900s as well as Mesa Boogie Dual Rectifiers and Fender Twins and others. This combination allowed them to get the perfect balance between power and clarity that has come to define their sound.
On stage, Def Leppard continued to rely on Marshall amplifiers. For most of the band’s career, lead singer Joe Elliott has been seen with a JCM 900 head and 4×12 cab whereas guitarist Phil Collen has favored using a JCM 800 head and 4×12 cab. Other members have been known to use different combinations of amps too, such as Peavey 5150 heads with 4×12 cabs or Mesa Boogie Dual Rectifiers.
Today, Def Leppard continues to use Marshall amplifiers almost exclusively when playing live. They’ve also recently switched over to using digital modeling amps such as Fractal Audio’s Axe-Fx which allow them to replicate the sounds of any amp they want with just one piece of equipment. Whatever combination of amps they’re using at any given time though, one thing is certain – Def Leppard’s signature sound will always be unmistakable!
What amp did Peter Green use
Peter Green was a legendary blues guitarist and founding member of Fleetwood Mac. His guitar playing was widely acclaimed for its technical brilliance and expressive feel, and he is remembered as one of the greatest blues guitarists of all time.
When it comes to his gear, Peter Green was known to be a bit of a minimalist. He preferred the simplest and most basic of equipment in order to focus on his playing rather than tweaking knobs and dials. His main guitar was a Les Paul Standard that he used for most of his career, but what about the amp?
Peter Green’s main amp was a Vox AC30. The AC30 is one of the most iconic amps in music history, having been used by everyone from The Beatles to Jimi Hendrix. It is a great choice for blues as it has plenty of headroom and can produce warm tones with just the right amount of grit.
Green used this amp throughout his career, only occasionally switching it up with other models such as Fender Twin Reverbs or Marshall stacks. His settings were famously simple; he kept the treble around 7 or 8, the bass at 4 or 5, and the reverb at 4 or 5 as well.
In addition to his main amp, Green also used various effects pedals such as fuzz boxes, wahs, and delays to further shape his sound. He had an incredible ability to make any combination of effects sound great, so no matter what kind of tone he was going for, he could always get it with the right combination of pedals and amps.
So there you have it – Peter Green’s main amp was the ever-iconic Vox AC30. With this amp combined with his own unique style of playing, Peter Green created some of the most memorable blues music ever recorded.
What amp did paul mccartney use
Paul McCartney is well known for his signature bass playing style and the equipment he uses to achieve that sound. He has been associated with a variety of basses throughout his career, but two of the most iconic basses used by Paul McCartney are the Fender Precision Bass and the Hofner 500/1 Violin Bass.
The Fender Precision Bass is one of the most popular bass guitars of all time and was introduced in 1951. It is a four-string electric bass guitar with two single coils and a split pickup configuration. Paul McCartney used this instrument throughout his career, both in the studio and live, resulting in some of his most memorable performances.
The Hofner 500/1 Violin Bass is also known as the ‘Beatle Bass’ as it became synonymous with Paul McCartney’s style. This instrument was first introduced in 1956 and features a violin-shaped body and a single pickup configuration. The neck is slightly shorter than that of a regular Fender bass, making it easier for Paul McCartney to reach up the fretboard. Paul McCartney made extensive use of this instrument during his time in The Beatles, which resulted in some of their most iconic records.
Paul McCartney’s bass playing style has shaped modern music for decades and continues to be an inspiration for many musicians today. He has been associated with both the Fender Precision Bass and the Hofner 500/1 Violin Bass, making them some of the most iconic instruments of all time.
What amp did Jimi Hendrix use
Jimi Hendrix is one of the most iconic guitarists in music history, so it’s no surprise that his choice of amp has been a subject of fascination for guitarists around the world. Hendrix used a variety of different amps throughout his career, including Fender Twins and Marshalls. He was known to be a fan of Vox AC30s and often used them during his shows. In the studio, he favored Fender Dual Showman Reverbs and Marshall Super Leads. However, his main amp setup on stage was a customized Marshall Super Lead 100 watt amplifier head with two 4×12 cabinets. The cabinets contained Celestion Greenback speakers and were eventually dubbed “The Hendrix Stack”. This setup was often modified to include a Leslie rotating speaker cabinet, which gave his sound its distinctive swirling tones. Hendrix also experimented with other brands like Ampeg and Hiwatt, but the Marshall Super Lead was his main amp for live performances. He even had custom models made for him by Marshall, featuring unique features and modifications. While Hendrix’s gear choices may have changed over time, it’s clear that the Marshall Super Lead was an essential part of his iconic sound.