Connecting your Wavlink AC1200 Wi-Fi extender to your existing network is a great way to boost your home’s Wi-Fi coverage and speed. Here are the steps you need to take to get your Wavlink AC1200 Wi-Fi extender up and running:
1. Plug in your Wavlink AC1200 Wi-Fi extender near your existing router. Make sure the extender is within range of the router’s signal, as this will ensure a better connection.
2. Connect the Wavlink AC1200 Wi-Fi extender to a power source using the included power adapter.
3. Press and hold the WPS (Wi-Fi Protected Setup) button on your existing router for 3 seconds. This should start the connection process between the router and the Wavlink AC1200 Wi-Fi extender.
4. Within two minutes, press and hold the WPS button on the Wavlink AC1200 Wi-Fi extender for 3 seconds. This will complete the connection between the router and the extender.
5. Once connected, use the included Ethernet cable to connect your computer or other device to one of the LAN ports on the Wavlink AC1200 Wi-Fi extender.
6. Open a browser on your connected device and type in “192.168.10.1” in the address bar (without quotes). This will open up a login page for the Wavlink AC1200 Wi-Fi extender’s settings page.
7. Enter “admin” (without quotes) as both the username and password to access the settings page of your Wavlink AC1200 Wi-Fi extender.
8. If prompted, set up a new username and password for your Wavlink AC1200 Wi-Fi extender. This makes it more secure from any unwanted access from other devices or people in your area.
9. On the settings page, select “Wireless” from the menu options on the left side of the screen and then click “Wireless Settings” from there to configure the wireless settings for your Wavlink AC1200 Wi-Fi extender.
10. Set up a new Wireless Network Name (SSID) and Password for your Wavlink AC1200 Wi-Fi extender so that it can be easily recognized by other devices when they search for available networks in their area.
11. Click “Save Changes” to apply all of these settings and complete the setup process for your Wavlink AC1200 Wi-Fi extender!
How do I connect my AC1200 WiFi range extender to my router
If you’re looking to extend the range of your WiFi network, one of the best ways to do it is by connecting an AC1200 WiFi range extender to your router. AC1200 is a great option for extending your WiFi range because it offers fast speeds and reliable connections. It’s also relatively easy to set up and can be done in a few simple steps.
Before you begin, be sure that you have all of the necessary equipment. You’ll need an AC1200 WiFi range extender, your router, an Ethernet cable, and a power source. If your router has a WPS (WiFi Protected Setup) button, you may not need the Ethernet cable.
Once you have all of the necessary equipment, you’re ready to get started. First, plug in the AC1200 range extender to a wall outlet near your router. Then, connect the range extender to your router using either an Ethernet cable or by pressing the WPS button on both devices if they have one. After that, wait for the connection to be established before continuing.
Next, open up a web browser and type in ‘192.168.1.1′ in the browser bar. This is generally the address for most routers and will take you to the login page for your router settings. Once there, enter your username and password for the router and click on ‘wireless settings’ or ‘WiFi settings’ depending on which model of router you have.
From here, locate ‘extender mode’ or ‘repeater mode’ and select it from the menu options. This will enable your router to connect with the AC1200 range extender so that it can extend your WiFi signal further out into your home or office space. Make sure to save any changes you make before exiting out of this page and then log out of the router settings page entirely.
Finally, return to the AC1200 range extender and connect it to your home network using either an Ethernet cable or by pressing its WPS button if it has one. The device should now automatically connect to your existing router and begin extending its signal outwards from there. You should now be able to enjoy a stronger WiFi signal in areas where it was previously weak or nonexistent!
How do I connect my Wavlink Extender to my router
If you’re trying to connect your Wavlink Extender to your router, the process is a fairly straightforward one. First, make sure the extender is powered on and within range of your router. Then, use an Ethernet cable to connect the extender’s LAN port to a LAN port on your router. Once the connection is established, you can access the Wavlink Extender’s web-based setup page by entering its IP address into your browser.
Once you have accessed the setup page, you will need to configure the extender with the same network settings as your router. This includes entering in your network’s SSID (name) and password. You can find these details on the back of your router or in your router’s administrative panel. Once you have entered in the correct information, save it and the extender should now be connected to your router.
You can now enjoy extended wireless coverage throughout your home or office. To ensure optimal performance, it’s important to position the extender in an optimal location where it has a clear line of sight to both your router and any other devices that need to be connected to it. Doing so will help ensure that you get the best signal possible from your Wavlink Extender.
How do I connect my Wavlink to WiFi
Connecting your Wavlink to a WiFi network is relatively straightforward, and only requires a few steps.
1. First, make sure that your Wavlink device is powered on and that you have the necessary cables connected.
2. Next, open the Wavlink app on your device and select “Settings” from the main menu.
3. Scroll down to “WiFi” and select it.
4. Select your desired WiFi network from the list of available networks. If it is password protected, enter the password when prompted.
5. Once you have entered the correct credentials, your Wavlink should connect to the WiFi network automatically. You can then use the app to check your connection status or adjust other settings as needed.
6. Finally, test out your connection by loading up a web page or streaming a video through your Wavlink device to make sure everything is working properly.
That’s all there is to it! As long as you have your network credentials handy and the correct cables plugged in, connecting your Wavlink to a WiFi network should only take a few minutes of your time.