If you’ve just purchased a Deco whole home Wi-Fi system and want to know if it’s working correctly, there are a few simple tests you can do to make sure that your system is up and running. Here’s how to check if your Deco is working:
Step 1: Check the LEDs
The lights on the Deco units will tell you a lot about your Wi-Fi system’s performance. All three of the Deco units should have a power light. If this light is off, make sure that the unit is plugged in correctly and that the outlet has power. The Deco units will also have an Internet light, which should be solid green when connected to the router. If the Internet light is off or blinking, then your Deco is not connected to your router.
Step 2: Connect to Wi-Fi network
After making sure that all of the LEDs are working properly, take a device such as a laptop or smartphone and connect it to one of the Decos in your home. Look for the name of your Deco network in the list of available networks or SSIDs. If you see it, that means that your Deco is broadcasting Wi-Fi signals and should be working properly.
Step 3: Check the speed
Once you’ve connected to one of your Deco units, you can check its performance by doing a speed test. Open a speed test app or website on your device and run the test. You should see results similar to what you would get if you were connected directly to your router. If the speeds are significantly lower than what you expect, then there may be something wrong with one of your Decos.
Step 4: Reboot if necessary
If you’re still having trouble with one of your Decos, try rebooting it by unplugging it from power for 10 seconds and then plugging it back in. This can often solve connection issues with Decos and other wireless devices.
By following these simple steps, you should be able to determine whether or not your Deco system is working properly. If you’re still having trouble with your Decos after trying these steps, contact TP-Link support for further assistance.
Why is my Deco light red
If you’ve noticed your deco light turning red, there are a few potential causes, and it’s important to identify the underlying issue in order to ensure optimal performance of your deco.
One of the most common causes of a red deco light is that your deco is too far away from the main router. This can cause the signal to become weakened and cause the deco light to turn red. To fix this, move the deco closer to the main router, or reposition them in a way that better maximizes their signal strength.
Another possible cause of a red deco light is that your device may be experiencing interference from other wireless devices in your home. This could be caused by a number of devices, such as microwaves, baby monitors, or even other routers. If this is the case, you can try moving your deco away from these devices or turning them off while you troubleshoot.
If your deco has been running for a while, it may be time to perform a reboot. Rebooting can help reset any errors and help resolve any issues with your connection. In some cases, performing a full reset may also be necessary in order to fully clear any errors and ensure optimal performance.
Lastly, it may be possible that there is an issue with your internet service provider (ISP). You can contact your ISP to see if there are any outages or other issues with their service that could be causing your deco light to turn red.
In conclusion, if your deco light is red, there may be several potential causes. It’s important to identify the underlying issue so you can properly address it and get your connection back up and running again.
What does Deco flashing red mean
Deco flashing red is an indication that the Deco network is not working properly. This could be due to a number of issues, such as a lack of power, interference from other wireless devices, or even a faulty Deco unit.
If your Deco is flashing red, it’s best to take the following steps to try and diagnose the problem:
1. Check your power supply. Make sure that all of your Deco units are plugged in and that they are receiving power. You may need to reset the power outlet or move the Deco away from any potential sources of interference if possible.
2. Check for interference from other wireless devices. If you have multiple wireless devices in your home, try turning them off one by one and testing the Deco connection after each device is powered off. This can help you identify which device is causing the issue.
3. Reset your Deco network and restart your devices. If the issue persists after taking the above steps, you may need to reset your Deco network from scratch and restart all of your connected devices before trying again.
If none of these steps resolve the issue, it’s possible that one of your Deco units is faulty and needs to be replaced. In this case, contact TP-Link support for assistance with diagnosing and replacing any faulty units.
How do I fix my TP Link Deco red light
If the red light on your TP Link Deco is flashing, it means that something is wrong with the system. It could be a number of things, so it’s important to diagnose the issue in order to fix it.
1. Check the power supply: Start by checking that the power supply is securely plugged in and that it is switched on. Also make sure that the electrical outlet you’re using is working properly. If the power supply appears to be okay, try unplugging it and plugging it back in again.
2. Check the cables: Make sure that all of the Ethernet cables are securely connected and that none of them have any kinks or bends in them. If any of the cables appear to be damaged, replace them with new ones.
3. Reset the Deco: If all of the above steps don’t work, try resetting your Deco by pressing and holding down the Reset button for 10 seconds. This will reset all settings back to factory defaults and should resolve any issues you’re having with the device.
4. Check for interference: If you still can’t get a connection, try moving your Deco away from other electronic devices or sources of interference such as microwaves or baby monitors.
5. Update firmware: The last step you can take is to check if there are any updates available for your TP Link Deco firmware and install them if necessary. This may help resolve any compatibility issues that could be causing problems with your connection.
If none of these steps work, you may need to contact TP Link customer service for additional support.