Rekeying an old Kwikset deadbolt is a relatively simple process that can be completed in a matter of minutes. The process involves removing the existing lock cylinder, which houses the pins and springs that allow the lock to open when a key is inserted, and replacing it with a new one. This allows you to use a different key to open the lock and prevents anyone who had access to the old key from being able to use it.
Before you start rekeying your Kwikset deadbolt, make sure you have all the necessary tools and materials. You’ll need a pinning kit, which will include everything you need to rekey the lock, including new pins, a pinning tool, and a plug follower. You’ll also need a small flat-head screwdriver and some lubricant.
Once you have all of your tools and materials ready, begin by removing the existing cylinder from your Kwikset deadbolt. This is typically done by inserting the screwdriver into the small hole at the top of the cylinder and pushing in to release it from the frame. Next, insert the plug follower into the cylinder so you can access the pins inside.
Using your pinning tool, remove each of the old pins from the cylinder one at a time and replace them with new ones from your pinning kit. Make sure each pin is inserted into its proper place. Once all of the pins have been replaced, insert the new cylinder into place and secure with a few turns of your screwdriver.
Finally, lubricate all of the moving parts on your Kwikset deadbolt with some lubricant or graphite powder. This will help ensure that your lock operates smoothly and prevents any sticking or jamming when you use your new key.
And that’s it! Rekeying an old Kwikset deadbolt isn’t too difficult after all. With just some basic tools and materials, you can easily give your existing lock a fresh start with a new key.
How do you rekey an old door lock
Rekeying an old door lock can be a relatively simple process if you have the right tools, although it is important to note that some locks may require a professional locksmith due to their complexity. Rekeying a lock allows you to use the existing lock but replace the cylinder with a new one, resetting the pins so that it only works with a new key. This is an ideal solution if you have lost your keys or want to change who has access to your property without replacing the entire lock.
Before you start rekeying a lock, make sure that you have all of the necessary tools, including an appropriate key blank, a rekeying kit, and a screwdriver. It is also important to have a good understanding of how locks work and how to identify the different parts of a lock.
To begin rekeying the old door lock, start by removing the screws from the faceplate and then use the screwdriver to remove the cylinder from inside the door. Once this is done, use the rekeying kit to identify and remove all of the pins from the cylinder. Make sure that you keep all of these pins together in order so that you can easily reinstall them in their original positions.
Next, insert the key blank into the cylinder and then use your rekeying kit to reset each pin accordingly, following any instructions provided by your specific kit. Once all of the pins have been reset, you can then reinstall all of them back into the cylinder. Replace any worn or damaged pins with new ones from your kit or purchase them separately.
Finally, take your newly cut key and insert it into the cylinder to make sure that it works properly. If it does not turn smoothly, then try resetting some of the pins again and see if that solves the issue. Once everything is working correctly, replace any screws and put in fresh batteries if necessary before testing your newly rekeyed lock out on your door. With patience and practice, rekeying an old door lock can be a straightforward process that anyone can do with minimal tools and effort.
How do you rekey a Kwikset lock
Rekeying a Kwikset lock is a relatively simple process that requires only a few basic tools. The process involves removing the cylinder from the lock and replacing the pins or wafers inside with new ones. This will change the combination of the lock so that it can no longer be opened with the old key. By rekeying, you can make sure that old keys no longer work without having to replace the entire lock.
First, you’ll need to find a rekeying kit specifically designed for Kwikset locks. These kits typically come with new pins and wafers, as well as a tool to remove the existing pins and wafers in the cylinder. Once you have your kit, follow these steps to rekey your Kwikset lock:
1. Insert your original key into the lock and turn it a few times to ensure it works properly.
2. Remove the cylinder from the lock by unscrewing the retainer screws on either side.
3. Use the tool provided in your rekeying kit to press down on each of the old pins or wafers and remove them from the cylinder.
4. Insert your new pins or wafers into the cylinder according to the instructions included with your rekeying kit.
5. Re-insert the cylinder into the lock and replace the retainer screws.
6. Test out your new key to make sure it works properly before securing the cylinder back into place.
By following these simple steps, you can easily rekey your Kwikset lock and make sure that old keys no longer work without having to replace the entire lock. While rekeying is a relatively straightforward process, it’s always best to seek professional assistance when dealing with locks if you are unsure of what you are doing.
Can you use any key to rekey a Kwikset lock
If you have a Kwikset lock installed on your door and need to rekey it, there are a few different options available. Depending on the type of lock you have, you may be able to use any key to rekey the lock, or you may need to purchase a special key blank or a rekeying kit.
If you have a Kwikset SmartKey lock, the process is relatively simple. All you need to do is insert the existing key into the lock and turn it counterclockwise until it stops. Then, insert the new key into the lock and turn it clockwise until you hear it click twice. This will reset the pins in the cylinder and allow your new key to be used.
If your Kwikset lock is not a SmartKey model, then you will need to purchase a special rekeying kit. The kit includes all of the tools you need to change the tumblers and pins within the cylinder so that your old key will no longer work in the lock. To use this kit, follow the instructions included with it, making sure to keep track of which pins go where. Once all of the pins are in place, test out your new key to make sure it works properly.
Rekeying a Kwikset lock is not always as straightforward as using a SmartKey model, but with a little bit of patience and careful attention to detail, it can be done. Whether you choose to use any key or buy a special rekeying kit, make sure you follow all instructions carefully so that your new key works properly and provides you with secure access to your home or business.
How do I change my Kwikset lock number
If you’re looking to change your Kwikset lock number, then you’ve come to the right place. Changing your Kwikset lock number is not as difficult as it may seem, and with just a few simple steps, you can easily change the code on your Kwikset lock.
The first thing you need to do is locate the programming tool that came with your Kwikset lock. This tool is a small metal rod that fits into a slot in the side of the lock. Once you have located this tool, insert it into the slot and turn it counterclockwise until it clicks into place.
Next, use the tool to push in on the reset button located inside the lock. The reset button looks like a small black button inside the keyhole area of the lock. Push in on this button for several seconds until you hear a faint beep sound indicating that the code has been reset.
Now, enter your new code into the keypad. To enter your new code, press each number individually, starting from left to right. Enter your new code twice to confirm that you have entered it correctly and then press the “enter” or “#” key.
Finally, remove the programming tool and test out your new code to make sure it works properly. Once you have verified that your new code is working properly, store the programming tool in a safe place so you can access it if you need to change your code again in the future.
And there you have it! Now that you know how to change your Kwikset lock number, you can now easily and quickly update your code whenever needed.
How does Kwikset rekeying work
Kwikset rekeying is a process that allows you to change the internal pins and springs in your locks so that they will only accept a new key. This is an important security feature that allows you to have additional control over who can access your home or office.
The process for rekeying your Kwikset locks is relatively simple, but it’s important to understand the basics of how it works before you attempt to do it yourself. Here’s a step-by-step guide on how to rekey your Kwikset locks:
1. Gather the necessary tools. Before you begin, you’ll need some basic tools such as a screwdriver, pliers, and a key gauge. You’ll also need the Kwikset rekeying kit, which includes all the parts you need to safely and securely rekey your locks.
2. Remove the lock cylinder. Using the screwdriver, remove the screws from the lock cylinder and carefully remove it from the door.
3. Remove the old pins and springs. Once you have the lock cylinder removed, you will be able to see the pins and springs inside. Use a pair of pliers to remove them from the cylinder. Keep in mind that these parts are very small and can easily be lost if not handled with care.
4. Insert the new pins and springs into the lock cylinder. Using the guide provided in your rekeying kit, insert each pin into its corresponding spot inside the lock cylinder. Make sure that each pin is properly seated before inserting any more pins or springs.
5. Reassemble the lock cylinder and test it out using your key gauge. Once all of your new pins and springs are inserted into their respective spots inside of your lock cylinder, use your screwdriver to reassemble it onto your door and then test it out by inserting a key gauge into the keyhole of your lock cylinder to make sure it works correctly with your new key. If all goes well, then you’ve successfully rekeyed your Kwikset locks!
Rekeying your Kwikset locks is an easy way to increase security around your home or office while also saving money on having to buy new locks entirely. With just a little bit of time and effort, you can be sure that only those with authorized keys will be able to access whatever area you need protected!