If you’re receiving error code 90 on your Wyze device, it’s likely due to a connectivity issue. This can be caused by a variety of issues, but there are some steps you can take to try and resolve the issue:
1. Check your Wi-Fi connection: Ensure that the Wi-Fi connection you’re using is working properly, and that the signal strength is strong enough for the Wyze device to function. You may need to move or extend the range of your router in order to get a stronger signal.
2. Update the Wyze app: Make sure you have the latest version of the Wyze app installed on your device. Open the app, go to Settings, and check for updates.
3. Update your Wyze device’s firmware: To do this, open the Wyze app, select your device’s settings, then select “Update Firmware”. Follow the instructions provided on screen to complete the process.
4. Reboot your device: Unplug your Wyze device from power for at least 30 seconds, then plug it back in and wait for it to reconnect to Wi-Fi.
5. Reset your Wyze device: If all else fails, you can factory reset your Wyze device by pressing and holding the reset button for 10 seconds. Once done, follow the instructions provided in the app to set up your Wyze device again.
If none of these steps resolve your issue with error code 90, contact Wyze Support for further assistance. Good luck!
What is Wyze code 90
Wyze Code 90 is a unique feature of the Wyze Security System. It is a code that can be used to create a secure connection between your Wyze Security System and your home Wi-Fi network. This code is required for the initial setup of your Wyze Security System and is necessary to ensure that your system is properly configured and connected to your home network.
Essentially, this code serves as a PIN number that needs to be entered in order to complete the setup process. It provides an extra layer of security and helps protect the system from being accessed by unauthorized users. Once you have entered the code, all data sent over the Wi-Fi network will be encrypted and secure.
The code itself is randomly generated and consists of 90 characters. This means that it is nearly impossible for anyone to guess or crack the code by guessing it manually. The only way for anyone to gain access to your Wyze Security System would be if they had physical access to your router or modem.
If you have lost or forgotten your Wyze Code 90, you can contact customer support and they can help you reset the code or provide you with a new one. When setting up your Wyze Security System, make sure that you write down the code in a safe place so that you can always refer back to it if needed.
How do I get my Wyze doorbell back online
If your Wyze doorbell is having trouble staying online, there are a few things you can do to get it back online.
First, make sure that your router and the doorbell are both connected to the same network. To do this, you can use the Wyze app to check your router’s connection to the doorbell. If your router is not connected to the doorbell, you can try resetting your router or updating its firmware.
Second, if you are using a 5 GHz network, switch it to a 2.4 GHz network. 5 GHz networks are not as reliable as 2.4 GHz networks when it comes to keeping devices connected.
Third, make sure that the antenna on the back of the doorbell is in an upright position and not blocked by any objects. This will ensure that the signal strength is strong and consistent.
Fourth, check the distance between your router and doorbell. The closer they are together, the better the connection will be. If they are too far apart, you may need to move them closer or invest in a wireless range extender.
Fifth, try resetting your doorbell by pressing and holding down its reset button for 10-15 seconds. This should reset all of its settings and allow it to reconnect to your router.
Finally, if none of these steps work, then it may be time to contact Wyze’s customer service team for further assistance with getting your doorbell back online. They should be able to provide you with more specific instructions on how to resolve your issue.
Why is my Wyze doorbell not connecting
Having a Wyze Doorbell that won’t connect can be incredibly frustrating, especially when you’re eager to get your home security system up and running. Fortunately, there are a few steps you can take to try and troubleshoot the issue.
First, make sure the Wyze Doorbell is powered on and connected to your Wi-Fi network. Check the app to make sure the device is connected to the same Wi-Fi network you’re using. If it’s not connecting, then you may need to try resetting the device. To do this, press and hold the button on the back of the Wyze Doorbell for 10 seconds until it starts blinking green. Wait a few moments and it should reconnect automatically.
If that doesn’t work, try removing and reinstalling the Wyze app and checking for any firmware updates. You should also check any firewall settings or antivirus software that could be preventing devices from connecting to your network. If you’re still having trouble connecting, contact Wyze directly for assistance.
Finally, if all else fails, make sure that your internet connection is stable and strong enough to support the Wyze Doorbell’s bandwidth requirements. You may need to upgrade your router or internet plan in order to ensure reliable connection for your device.
By following these simple steps, you should be able to get your Wyze Doorbell up and running without too much trouble. With a bit of patience and some troubleshooting savvy, you’ll be able to enjoy all the benefits of having a smart doorbell in no time!
How do I reconnect my Wyze doorbell to a new Wi-Fi
If you’re trying to reconnect your Wyze Doorbell to a new Wi-Fi network, you’ve come to the right place. Reconnecting your Wyze doorbell is a simple process that only takes a few minutes. Here’s what you need to do:
First, download the Wyze app on your mobile device if you haven’t already. Once you’ve done that, open the app and select “Add Device” from the list of options. Then, select “Doorbell” from the list of Wyze products.
Once you’ve selected “Doorbell,” a new page will appear with instructions on how to connect your Wyze doorbell to a new Wi-Fi network. Follow the steps carefully as some may vary depending on your device and router settings.
Once you’ve followed all the steps on the page, it’s time to test if the connection was successful. To do this, press and hold the setup button located at the back of your Wyze Doorbell for about 5 seconds. If your doorbell starts flashing blue with an audible sound, then you’ve successfully reconnected it to your new Wi-Fi network.
Finally, once your doorbell is connected to your new Wi-Fi network, you can start using it with all its features. Remember, if at any point during the setup process you encounter any issues or have any questions, feel free to reach out to Wyze support for further assistance.
Why can’t my Wyze Cam find my network
If you’re having trouble getting your Wyze Cam to connect to your network, you’re not alone. Many users experience the same issue when setting up their Wyze Cam for the first time. Fortunately, there are a few things you can do to troubleshoot and get your camera connected.
First, make sure that your router is on and the Wi-Fi is enabled. The Wyze Cam uses a 2.4 GHz frequency to connect to your network, so make sure that your router is set to broadcast in this frequency. If it isn’t, log into your router settings and change the frequency to 2.4 GHz.
Next, make sure that your router is using WPA2 encryption. This type of encryption is more secure than other types and it’s necessary for connecting the Wyze Cam. If your router is using WEP or WPA encryption, log into the settings and change it to WPA2.
Finally, make sure that you’re entering the correct Wi-Fi password when setting up the Wyze Cam. The password should be case sensitive and should include any special characters (e.g., @ or #). If you’re still having trouble connecting, try resetting the Wyze Cam and restarting your router before attempting to connect again.
If none of these steps work, you may need to contact Wyze support for more help troubleshooting the issue. The team is available 24/7 and can help walk you through any additional steps needed to get your camera connected to your network.
How do I reset my Wi-Fi Wyze
If you’re having trouble connecting to Wi-Fi with your Wyze device, you may need to reset it. Resetting your Wi-Fi Wyze can be done in a few simple steps.
First, make sure your device is powered off and that the indicator light on the back is not lit up. This will ensure that no power is running through the device when you reset it.
Once your device is powered off, locate the reset button on the bottom of the device. This should be a small hole with a tiny reset button inside. Use a paperclip or similar object to press and hold the reset button for 10 seconds. After 10 seconds, release the button and wait for the power light to flash red and green multiple times. When this happens, your Wyze has been successfully reset.
Now that your device has been reset you will need to go through the setup process again to get your Wi-Fi connection established. Begin by plugging in your Wyze and turning it on. Once powered on, look for the Wi-Fi SSID (network name) that is associated with your Wyze device. This should appear under ‘Available networks’ on any wireless enabled devices within range of your Wyze.
Once you have connected to the Wyze Wi-Fi network, open a web browser on any connected device and type in 192.168.1.1 in the address bar. This will take you to the setup page for your Wyze device where you can enter in your home Wi-Fi network information and password. Once completed, click connect and you should now be connected to Wi-Fi with your Wyze device!
Resetting your Wi-Fi Wyze can be a great way to troubleshoot connection issues or simply start fresh with a new setup process. Following these simple steps should have you back up and running in no time!
How do I connect my Wyze to my network
If you’re trying to connect your Wyze device to your home network, then you’ve come to the right place. Connecting your device to your network is a simple process that only takes a few minutes. Here’s what you need to do:
1. Make sure your device is powered on and in range of your router.
2. Download the Wyze app from the App Store or Google Play Store.
3. Open the Wyze app and select “Add Device”.
4. Follow the on-screen prompts to connect your device to your Wi-Fi network. You will need your Wi-Fi password during this process.
5. Once connected, you should see a confirmation message in the Wyze app and on your device.
That’s all there is to it! Now you can use the Wyze app to control and monitor your device from anywhere in the world. If you have any questions or need additional help, please contact our support team at any time. We’re always happy to help!