How do I reset my Tapo p100 plug

If you need to reset your Tapo p100 plug, there are a few simple steps you can take to do so. Resetting your Tapo p100 plug can be done either through the app or manually.

Resetting Through the App

The easiest way to reset your Tapo p100 plug is through the Tapo app. To begin, open the app on your mobile device and go to the “Devices” tab. Here, select the Tapo p100 plug you would like to reset. Then, click on the “Settings” button in the top right corner. Scroll down and select “Factory Reset”. Confirm that you would like to reset the plug by tapping “OK”. The plug will then restart and be ready for new setup.

Manual Reset

If you are unable to access the app, you can also reset your Tapo p100 plug manually. To do this, start by unplugging the device from the wall outlet and turning it off. Locate the small reset button on the back of the device and press it using a paperclip or pin for 10-20 seconds until you hear a beep. Once you hear this sound, release the button and turn the device on again. The device should now be in its factory settings, ready for a new setup.

No matter which method you choose to use, make sure that your Tapo p100 plug is properly reset before attempting to reconnect it to your Wi-Fi network or other devices. Following these steps should help ensure that everything runs smoothly!

How do I connect my Tapo p100 to Wi-Fi

Connecting your Tapo P100 to Wi-Fi is a relatively simple process. With your Tapo P100 plugged in and connected to power, you are ready to begin the process of connecting your device to Wi-Fi.

1. Download the Tapo app onto your mobile device. Once downloaded, open the app and follow the on-screen instructions to create an account.

2. Select the “Add Device” option from the main menu. This will take you through the steps of connecting your Tapo P100 to Wi-Fi.

3. Select “Tapo P100” as the device type that you are connecting and then select “Next”.

4. On your Tapo P100, press and hold the setup button for 3 seconds until it starts blinking blue and then release it. Once released, the Tapo P100 will start searching for available Wi-Fi networks in your area.

5. Back in the app, select your Wi-Fi network from the list of available networks and enter your Wi-Fi password when prompted.

6. Once connected, you will be asked to give your device a name for easy identification later on. Once you have given it a name, select “Done” and you should now be connected to Wi-Fi with your Tapo P100!

How do I connect my TP-Link camera to Wi-Fi

If you have recently purchased a TP-Link camera and want to connect it to your Wi-Fi network, then you’ve come to the right place. In this article, we’ll walk you through the steps to get your TP-Link camera connected to your Wi-Fi network in no time.

Before you start, make sure that you have the following items:

1. The TP-Link camera

2. A router with 2.4GHz or 5GHz Wi-Fi connection capability

3. The power adapter for the camera

4. An Ethernet cable (optional)

Now let’s get started with connecting your TP-Link camera to your Wi-Fi network.

Step 1: Connect the power adapter to the camera and plug it into an electrical outlet. Make sure that the power indicator light on the camera is on and steady.

Step 2: Connect your router to the internet and make sure that it is broadcasting a 2.4GHz or 5GHz Wi-Fi signal. If your router is dual band, then it should be broadcasting both signals at once.

Step 3: On your computer or mobile device, search for available Wi-Fi networks and select the one named “TP-Link_Camera” from the list of available networks. Enter the default password “12345678” when prompted and click “Connect” . If a different password was previously set up, then use that one instead.

Step 4: Once connected, open a browser window on your computer or mobile device and enter “” in the address bar. This will bring up the TP-Link Camera Setup page.

Step 5: Enter your router’s username and password if prompted and click “Login” to access the setup page.

Step 6: On the setup page, select your router’s Wi-Fi network from the list of available networks and enter its password when prompted. Click “Apply” when done to save the settings and connect your camera to your Wi-Fi network.

Step 7: Once connected, you can access your TP-Link camera by entering “” in a browser window or by using a mobile app such as TP-Link Camera Viewer (available for iOS and Android).

That’s all there is to it! Your TP-Link camera is now successfully connected to your Wi-Fi network and ready for use!

How do I connect my wireless camera to my network

Setting up a wireless camera on your home network can be a great way to keep an eye on your property and stay connected with your family and friends. However, it can also be a bit of a challenge if you’re unfamiliar with the process. Here are the basics of connecting your wireless camera to your network:

Step 1: Connecting Your Wireless Camera to Your Router

The first step is to connect your wireless camera to your router. To do this, you’ll need to locate the power cord for the camera and plug it into an available outlet. Once the power is connected, you’ll need to locate the correct port on your router that is designated for the camera. This port will likely be labeled “camera” or “IP camera” and should be clearly marked on the back of the router. Plug one end of an Ethernet cable into this port and the other end into the port on the back of your camera.

Step 2: Installing the Software for Your Wireless Camera

Once you have connected your wireless camera to your router, you will need to install any accompanying software or drivers that came with the camera. This software is usually provided on a CD or downloadable from the manufacturer’s website. Follow the instructions included with the software in order to install it correctly on your computer.

Step 3: Configuring Your Wireless Camera

Once you have installed the necessary software for your wireless camera, you will need to configure it so that it can connect to your network. This can usually be done by accessing a web-based configuration page either through a web browser or through a dedicated application provided by the manufacturer. You will need to enter in certain details such as IP address, username, password and other settings in order for your camera to connect to your network properly.

Step 4: Accessing Your Wireless Camera Remotely

Once you have configured your wireless camera, you will then be able to access it remotely from any Internet-connected device such as a laptop, tablet or smartphone. Depending on which type of wireless camera you have, there may be an application available that allows you to view live footage from anywhere in the world or even receive alerts if motion is detected within range of the camera.

By following these steps, you should now be able to successfully connect your wireless camera to your home network so that you can keep an eye on what’s going on in and around your property at any time.

Leave a Reply

Your email address will not be published. Required fields are marked *